<big id="jhfvr"></big>

      <video id="jhfvr"></video><del id="jhfvr"></del>

        <pre id="jhfvr"></pre>

              歡迎您訪福州豐潤電氣有限公司官方網站
              banner
              美國柏勒夫Marsh

               

              Type 1000

              Type 1000

              產品詳細

              產品介紹
               
               
              Type 1000
               
              Type 1000 I/P & E/P Transducers
              • Low Cost
              • Built-in Volume Booster
              • Small Size
              • Field Reversible
              • Low Air consumption
              • Mounts at Any Angle
              • Convenient External Span & Zero Adjusts
                (Except for Explosion Proof Models)
              • Light Weight
              • Wide Supply Pressure Range
              • Low Supply Pressure Sensitivity
              Product Detail:
              The Type 1000 Transducer is an electro-pneumatic device that reduces a supply pressure to a regulated output pressure directly proportional to an electrical input signal. The Type 1000 accepts a wide range of supply pressures, ranging from a minimum of 3 psig (0.2 BAR) above the maximum output up to 100 psig (6.9 BAR). An integral pneumatic volume booster is included in the design to provide high flow capacity (up to 12 SCFM/339 slpm). Model selections include general purpose, NEMA 4X Type, extended range, high relief, intrinsically safe, and explosion proof.
              Part Numbers:
              T-1000 General Purpose ordering information:
              Input
              Output*
              Part Number
              Impedance
              (nominal)
              psig
              BAR
              4-20mA
              3-9
              0.2-0.6
              961-072-000
              90Ω
              9-15
              0.6-1.0
              961-073-000
              90Ω
              3-15
              0.2-1.0
              961-070-000
              180Ω
              3-27
              0.2-1.9
              961-074-000
              220Ω
              6-30
              0.4-2.1
              961-075-000
              220Ω
              1-17
              0.07-1.2
              961-116-000
              250Ω
              3-15
              0.2-1.0
              961-089-000
              180Ω
              10-50mA
              3-15
              0.2-1.0
              961-076-000
              70Ω
              3-27
              0.2-1.9
              961-077-000
              85Ω
              6-30
              0.4-2.1
              961-078-000
              85Ω
              0-5V
              3-15
              0.2-1.0
              961-079-000
              615Ω
              3-27
              0.2-1.9
              961-080-000
              530Ω
              6-30
              0.4-2.1
              961-081-000
              530Ω
              1-9V
              3-15
              0.2-1.0
              961-085-000
              985Ω
              3-27
              0.2-1.9
              961-086-000
              840Ω
              6-30
              0.4-2.1
              961-087-000
              840Ω
              NOTE: For NEMA4X, add 004 suffix.
              T-1000 extended range ordering information:
              Input
              Output*
              Part Number
              Impedance
              (nominal)
              psig
              BAR
              0-60mA
              2-120
              0.1-8.3
              961-107-000
              220Ω
              4-20mA
              3-120
              0.2-8.3
              961-111-000
              260Ω
              2-60
              0.1-4.1
              961-117-000
              225Ω
              0-10V
              3-120
              0.2-8.3
              961-112-000
              805Ω
              0-5V
              2-60
              0.1-4.1
              961-118-000
              500Ω
              T-1000 HIGH RELIEF ordering information:
              Input
              Output*
              Part Number
              Impedance
              (nominal)
              psig
              BAR
              4-20mA
              3-9
              0.2-0.6
              961-130-000
              90Ω
              9-15
              0.6-1.0
              961-131-000
              90Ω
              3-15
              0.2-1.0
              961-132-000
              180Ω
              3-27
              0.2-1.9
              961-133-000
              220Ω
              6-30
              0.4-2.1
              961-134-000
              220Ω
              3-15
              0.2-1.0
              961-135-000
              180Ω
              1-17
              0.07-1.2
              961-136-000
              250Ω
              10-50mA
              3-15
              0.2-1.0
              961-137-000
              70Ω
              3-27
              0.2-1.9
              961-138-000
              85Ω
              6-30
              0.4-2.1
              961-139-000
              85Ω
              * For output pressures less than 3 psi (0.2 BAR) or greater than 30 psi (21 BAR), the Type 1000 transducer can be coupled to Bellofram Type 75 pneumatic relay. Consult Applications Engineers for further information.
              ** NEMA 4 type enclosure option available on all input/output ranges. This option is separate from explosion proof, NEMA 4 units.

              Type 1000 Explosion Proof
              Input
              Output*
              Part Number
              Impedance (nominal)

              Agency Approvals
              (see notes)

              psig
              BAR
              4-20mA
              3-15
              0.2-1.0
              961-098-000
              180Ω
              Explosion-Proof, Factory Mutual1
              3-15
              0.2-1.0
              961-098-100
              180Ω
              CSA Explosion Proof
              1-9v
              3-15
              20-100
              961-142-000
              985Ω
              Explosion Proof Factory Mutual1
              Type 1000 Intrinsically Safe
              4-20mA 3-15 0.2-1.0 961-099-000
              180Ω
              Intrinsically Safe, Factory Mutual3,4
              3-27 0.2-1.9 961-100-000
              220Ω
              Intrinsically Safe, Factory Mutual3,4
              3-15 0.2-1.0 961-105-000
              180Ω
              Intrinsically Safe, CSA5
              3-27 0.2-1.9 961-106-000
              220Ω
              Intrinsically Safe, CSA5
              6-30 0.4-2.1 961-101-000
              220Ω
              Intrinsically Safe, Factory Mutual3,4
              15-3 1.0-0.2 961-175-000
              180Ω
              Intrinsically Safe, Factory Mutual3,4
              27-3 1.9-0.2 961-176-000
              220Ω
              Intrinsically Safe, Factory Mutual3,4
              30-6 2.1-0.4 961-177-000
              220Ω
              Intrinsically Safe, Factory Mutual3,4
              *For output pressures less than 3 psi or greater than 30 psi the Type 1000 transducer can be coupled to Bellofram Type 75 pneumatic relay.  Consult application engineers for further information.

              Agency Approval Notes:

              1. The Type 1000 Explosion-Proof Transducer has been submitted, tested and approved by Factory Mutual Research for use in hazardous locations for Class I, Division 1, Group D, Class II, Division 1, Groups E, F & G and Class III requirements. It also has been approved to meet NEMA 4 Outdoor requirements.
              2. Canadian Standards Association certified for hazardous locations: Class I, Group D, Class II, Groups E, F and G, Class III, CSA Enc. 4.
              3. Factory Mutual Research Approved as intrinsically Safe for Class I, II, III, Division 1, Groups A, B, C, D, E, G when installed in accordance with interconnection diagram No. 541-000-012 and with the proper energy limiting barriers.
              4. Factory Mutual Research Approved as nonincendive for Class I, Division 2, Groups A, B, C, D, and suitable for Class II and III, Division 2, Group G. Barriers are not required for nonincendive rating.
              5. Canadian Standards Association certified as intrinsically safe when connected through certified diode safety barriers in accordance with Bellofram Installation Instruction 541-000-012.

              Explosion proof, intrinsically safe, and non-incendive ratings are not affected by recalibrating for split range or reverse acting applications.
              The Bellofram T-1000 Transducers were tested and found to comply with Electromagnetic compatibility Directive effective January 1, 1996. The relevant EMC specifications tested were the following: EN 50081-1 (1992) and EN 50082-1 (1992). A Technical Construction File, Serial #107 was written and Certificate of Conformity issued by a Competent Body.

              Options:
              Option Part Number/Last 3 digits
              Explosion Proof Mounting Kit 971-079-000
              Explosion Proof Panel Mounting Kit 971-078-000
              DIN Rail Kit 010-115-000
              Hirschman Connector Kit (3-prong) 971-126-000
              Filter Kit, Coalescing, 0.1 micron 010-140-000
              Filter Element Kit
              (for coalescing filter, package of 10)
              010-141-000
              Output Gauges–Option “8” last 3 digits become - 008
              Dielectric Strength Testing Option “12” last 3 digits become - 012
              NEMA 4X Type Enclosure Option: Option “4” last 3 digits become - 004**
              ** NEMA 4 type enclosure option available on all input/output ranges. This option is separate from explosion proof, NEMA 4 units.

               


              分享到:

               

               

              上一條:沒有了!  

              下一條:Type 1001

              點擊次數:點擊代碼  更新時間:2011-9-30 20:28:20  【打印此頁】  【關閉

               

               

               

              二維碼

               

              聯系我們 | 網站地圖 Copyright 2016 福州豐潤電氣有限公司 版權所有 | 網站備案/許可證號: 閩ICP備16038147號-1   網站建設信和網絡